We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Carbide End Mill.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Carbide End Mill(1000) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Aug 20, 2025～Sep 16, 2025
This ranking is based on the number of page views on our site.

Carbide End Mill Product List

1～15 item / All 27 items

Displayed results
6-blade high-hardness radius

6-blade high-hardness radius

The structural department can process this one item! Achieving overwhelming cost performance!

■Features - Flatness achievable due to solid tools. - Dimensional accuracy achievable due to six cutting edges. - Outer diameter tolerance 0 to -0.01, R accuracy ±0.01 - Prevention of chipping and improved machinability due to the two-blade design in the center. φ10R1, total length 100 Processing conditions: Rough cutting, rotation 4000, feed 2500, XY pitch 4 mm, Z pitch 0.3 mm Finishing, rotation 4000, feed 1000, XY pitch 4 mm, Z pitch 0.3 mm Capable of processing lengths of 200M Compatible with diameters from Φ6 to Φ20, with detailed requests for corner R, blade length, and relief total length possible.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tools for Composite Materials for CFRP and GFRP

Tools for Composite Materials for CFRP and GFRP

HAM is pioneering the present of CFRP! Numerous adoption records in the domestic automotive and aerospace industries. We can accommodate small lots starting from just one piece.

We provide standard and custom tools that excel in the processing of composite materials such as CFRP, GFRP, and AFRP, including trimming, drilling, and counterboring. We offer a wide range of products, including end mills for honeycomb materials used by aircraft manufacturers, end mills suitable for polyimide materials, and drills that accommodate pipe shapes. 【Product Lineup】 ◎ Various diamond coatings 　・Drills 　・End mills with 2 to 4 flutes 　・Ball end mills 　・Diamond-coated router bits/chip breakers ◎ PCD drills/reamers ◎ PCD end mills ◎ Carbide drills/reamers ◎ Carbide FRP drills 　Designed to prevent burrs and delamination, ideal for drilling CFRP and UD materials ◎ Various custom countersinks HAM cutting tools are also used in motorsports, lightweight materials for automobiles, bicycles, and motorcycles, as well as in drone component processing.

  • drill
  • End Mills
  • Reamer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill Unimax Series 'DCLRS'

Super Hard End Mill Unimax Series 'DCLRS'

4-flute diamond-coated long neck radius end mill for graphite electrode machining

We handle the Unimax series of carbide end mills 'DCLRS' from Union Tool Co., Ltd. By adopting a unique diamond coating film suitable for graphite machining, we achieve outstanding wear resistance. With a coating film that excels in adhesion and further optimizing the blade shape, we have achieved a long lifespan. 【Lineup】 ■DCLRS 4010-002-060 ■DCLRS 4010-002-100 ■DCLRS 4010-002-200 ■DCLRS 4010-005-060 ■DCLRS 4010-005-100, etc. *For more details, please download the PDF or feel free to contact us.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard end mill "2-flute diamond-coated ball"

Super hard end mill "2-flute diamond-coated ball"

Compatible with composite material processing! Diamond-coated double-edged carbide end mill.

The "2-Blade Diamond Coated Ball" is a product handled by BBK Company, which specializes in the manufacturing of precision cutting carbide tools, precision molds, and the production and sale of press parts. By coating diamond crystals onto a special carbide material, it achieves surface hardness comparable to natural diamonds while maintaining a cutting edge design focused on sharpness, making it suitable for processing graphite, aluminum alloys, copper alloys, as well as composite materials like CFRP and GFRP. 【Features】 ■ Diamond coating ■ Compatible with processing graphite, aluminum alloys, copper alloys, CFRP, and composite materials ■ High hardness coating ■ Twist angle of 30° ■ Grooving and multi-processing for intermediate/final finishes ＝＝＝＝＝ For more details, please contact us ＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto

  • Other cutting tools
  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill "2-Flute Diamond Coated EM"

Super Hard End Mill "2-Flute Diamond Coated EM"

Compatible with composite material processing! Diamond-coated two-flute carbide end mill.

The "2-Blade Diamond Coated EM" is a product handled by BBK Company, which specializes in the manufacturing of precision cutting carbide tools, precision molds, and the production and sale of press parts. By coating diamond crystals onto a special carbide material, it achieves surface hardness comparable to natural diamond while maintaining a blade shape focused on cutting performance, making it suitable for graphite, aluminum alloys, copper alloys, as well as composite materials like CFRP and GFRP. 【Features】 ■ 2-blade pin angle designed for groove, Z, and side processing in medium/fine machining ■ Diamond coating ■ Compatible with processing of graphite, aluminum alloys, copper alloys, CFRP, and composite materials ■ High hardness coating ■ Twist angle of 30° ＝＝＝＝＝ For more details, please contact us＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto

  • Other cutting tools
  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill Unimax Series 'CXRS/CXLRS'

Super Hard End Mill Unimax Series 'CXRS/CXLRS'

A carbide end mill compatible with a wide range of work materials from carbon steel to hardened steel (55 HRC).

We handle the Union Tool Co., Ltd.'s carbide end mills from the Unimax series, 'CXRS/CXLRS.' The seamless corner R shape significantly reduces cutting resistance. The unequal division and unequal lead shapes, along with the positive rake angle cutting edge design, enable high-efficiency machining for side processing. 【Lineup (CXRS)】 ■CXRS 5030-05-0600 ■CXRS 5030-05-0900 ■CXRS 5040-05-0800 ■CXRS 5040-05-1200 ■CXRS 5040-10-0800, etc. *For more details, please download the PDF or feel free to contact us.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill | High Efficiency | 'RF 100 Diver'

Super Hard End Mill | High Efficiency | 'RF 100 Diver'

Over 125 years of establishment, a German global manufacturer has developed the high-efficiency carbide end mill 'RF 100 Diver'.

The 'RF 100 Diver' demonstrates outstanding chip removal performance and tool life in milling various workpieces. It can perform drilling, ramping, and grooving with a single tool, reducing both the number of tools used and setup time. It enables a 40% longer tool life compared to conventional products. It is suitable not only for general steel but also for stainless steel and heat-resistant steel, making it ideal for machining tough materials. The type with coolant holes effectively protects the cutting edge and cools the machining area during milling in the radial direction and during drilling in the axial direction, while also ensuring accurate chip removal. *For more details, please refer to the PDF document or feel free to contact us.*

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill | High Efficiency | 'RF 100 Speed'

Super Hard End Mill | High Efficiency | 'RF 100 Speed'

"RF 100 Speed," a high-efficiency carbide end mill developed by Gühring, which has been expanding globally from Germany for over 125 years.

RF 100 Speed," excels in HPC milling and trochoidal machining with steel, stainless steel, and heat-resistant steel, offering excellent machining stability with a high chip removal rate. It enables high-efficiency roughing with a high cutting depth. The unique design with deeper grooves at the tip balances chip evacuation performance and tool rigidity. A wide chip pocket is provided at the bottom edge, allowing stable operations in the axial direction, such as ramping and helical machining. *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill | Soft Steel / High Alloy Steel | 'RF 100 Sharp'

Super Hard End Mill | Soft Steel / High Alloy Steel | 'RF 100 Sharp'

Over 125 years of establishment, a German-based global manufacturer has developed the carbide end mill 'RF 100 Sharp' for soft steel, high alloy steel, and heat-resistant alloys.

Specially designed for milling processing of soft steel, high tensile strength steel, and high alloy steel, the 'RF 100 Sharp' takes into account measures against adhesion to cutting edges and breakage due to chip clogging. It features a strong 12° radial rake angle, significantly reducing cutting resistance when processing these materials. It is widely applicable for grooving, rough machining, ramping, helical machining, and finishing. It can be used with equipment ranging from high-rigidity CNC milling machines to low-rigidity lathes. It is particularly suitable for processing soft steel, high tensile strength steel, and high alloy steel. *For more details, please refer to the PDF document or feel free to contact us.*

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
YG-1 "V End Mill"

YG-1 "V End Mill"

A carbide V end mill suitable for chamfering and V-grooving!

We handle the "V End Mill" manufactured by YG-1. This product, which performs four functions with one tool, has been standardized. It can perform V-groove machining, edge chamfering, single-sided chamfering, and drilling all with one tool. The tip angle is 90°, with drill diameters ranging from 1 to 20 in 11 sizes. The material is ultra-fine particle carbide, available in two types: with coating and without coating, totaling 22 standard types. 【Features】 ■ Tip angle 90° ■ φ1 to 20 ■ Ultra-fine particle carbide ■ Non-coated, TiAlN coated *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill "4-Flute High Efficiency Radius Diamond Coated EM"

Super Hard End Mill "4-Flute High Efficiency Radius Diamond Coated EM"

Compatible with composite material processing! High-efficiency 4-flute carbide end mill with diamond coating.

The "4-Blade High-Efficiency Radius Diamond Coated EM" is a product handled by BBK Company, which manufactures and sells precision cutting carbide tools, precision molds, and press parts. By coating diamond crystals onto a special carbide material, it achieves surface hardness comparable to natural diamonds while its cutting-edge design focuses on sharpness, making it suitable for graphite, aluminum alloys, copper alloys, as well as composite materials like CFRP and GFRP. The corner radius of the cutting edge is designed for high efficiency (high feed rate and high cutting depth) and to prevent burr formation. 【Features】 ■ Equipped with a 4-blade corner radius, allowing for high feed rates in side machining for medium/fine processing ■ Diamond coating ■ Compatible with machining of graphite, aluminum alloys, copper alloys, CFRP, and composite materials ■ High hardness coating ■ Helix angle of 30° ＝＝＝＝＝ For more details, please contact us＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto

  • Other cutting tools
  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard End Mill "2-Flute High Efficiency Radius Diamond Coated EM"

Super Hard End Mill "2-Flute High Efficiency Radius Diamond Coated EM"

Supports composite material processing! High-efficiency diamond-coated two-flute carbide end mill.

The "2-Blade High-Efficiency Radius Diamond Coated EM" is a product handled by BBK Company, which manufactures precision cutting carbide tools and sells precision molds and press parts. By coating diamond crystals onto a special carbide material, it achieves surface hardness comparable to natural diamonds while the blade shape focuses on cutting performance, making it suitable for graphite, aluminum alloys, copper alloys, as well as composite materials like CFRP and GFRP. The corner radius of the cutting edge is designed for high efficiency (high feed and high cutting depth) and to prevent burr generation. 【Features】 ■ 2-blade with corner radius, suitable for groove, Z, and side processing for medium/fine machining ■ Diamond coating ■ Compatible with machining of graphite, aluminum alloys, copper alloys, CFRP, and composite materials ■ High hardness coating ■ Twist angle of 30° ＝＝＝＝＝ For more details, please contact us＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto

  • Other cutting tools
  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diamond mill / diamond ball mill ultra-hard end mill

Diamond mill / diamond ball mill ultra-hard end mill

Achieving long-lasting processing of non-ferrous metals.

Achieving long-lasting processing of non-ferrous metals 100% diamond coating Ideal for non-ferrous metals such as aluminum alloys Over 10 times longer lifespan than untreated products in aluminum alloy processing Series Diamond Coated Drill Diamond Coated FF Drill

  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SUS Super Hard 4-Flute Solid High Helix End Mill

SUS Super Hard 4-Flute Solid High Helix End Mill

Low friction coefficient! Achieves good surface roughness even with SUS and SS material finishes!

The "SUS Super Hard 4-Flute Solid High Helix End Mill" is an end mill suitable for finishing stainless steel (SUS) and carbon steel (SS). Due to its low friction coefficient, it achieves excellent surface roughness not only for SUS but also for SS materials. It features an AlCr2O3 coating, with a hardness of 4000 Hv and a heat resistance temperature of 1100°C. 【Features】 ■ Medium-sized blade ■ Ideal for finishing stainless steel and SS ■ Low friction coefficient ■ Achieves good surface roughness for SUS and SS materials ■ Utilizes AlCr2O3 coating *For more details, please refer to the PDF document or feel free to contact us.

  • End Mills
  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard end mill "4-flute high feed diamond-coated ball"

Super hard end mill "4-flute high feed diamond-coated ball"

Compatible with composite material processing! Diamond-coated 4-flute carbide end mill.

The "4-Blade High Feed Diamond Coated Ball EM" is a product handled by BBK Company, which specializes in the manufacturing and sales of precision cutting carbide tools, precision molds, and press parts. By coating diamond crystals onto a special carbide material, it achieves surface hardness comparable to natural diamonds while its blade shape, focused on cutting performance, allows it to work with graphite, aluminum alloys, copper alloys, as well as composite materials like CFRP and GFRP. 【Features】 ■ 4-blade design allows for high feed rates for roughing and finishing ■ Diamond coating ■ Compatible with machining of graphite, aluminum alloys, copper alloys, CFRP, and composite materials ■ High hardness coating ■ Helix angle of 30° ＝＝＝＝＝ For more details, please contact us＝＝＝＝＝ TEL 044-811-0065 FAX 044-811-0925 Contact: Kawaguchi, Kamimoto

  • Other cutting tools
  • End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Carbide End Mill

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.